Low Voltage Wound Open Type Motors, Low Voltage Wound Open Type Motors Manufacturer, Mumbai, India
  • slide1
  • slide2
  • slide3
  • slide4
  • slide5
  • slide6
  • slide7
  • slide8
  • slide9
  • slide10
  • slide11
  • slide12
  • slide13
  • slide14
  • slide15
  • slide16
  • slide17
 

Wound Open Type Series (Low Voltage Motors)

 

Wound Open Type Series (Low Voltage Motors)

 

Specifications
FEATURES VALUES/ STANDARDS
Ambient Temperature -10 to +50°C
Altitude Not exceeding 1000mtrs above mean sea level.
Atmosphere Non Corrosive & non Hazardous
Relative Humidity Up to 100%
Voltage 415V±10% , 3 pH.
Frequency 50Hz ±5%
Combined Variation 10%
Duty S1 (continuous)
Service factor 1.0
 
 
FEATURES VALUES/ STANDARDS
Starting Resistive start
Permissible starts/hr Cold successive - 4 , Hot successive - 3 ,Equally spread - 6
Loading at reduced volts 75% Rated volts for 5 minutes
Insulation ST / RT Class `F' / 'F'
Temp. Rise ST / RT Class 'B' / 'F'
Direction of rotation Bi-directional
No. Of leads, ST / RT 3 / 3
Degree of protection IP 21 for SB/VSB series up to 225 Frame, IP 23 for SB/VSB series 250 & 355 frames
Method of cooling IC 01
T.box position RHS looking from DE
Bearing life
(90% survival basis)
40,000 working hrs. For direct drive
20,000 working hrs. For belt drive
Vibration Normal class as per IS: 12075.
Noise As per IS: 12065.
Construction Foot mounted / 'B' flange mounted.
Frame sizes SB / VSB 180 to 355. (for 'B' flange mounting ratings covered in SB180M to be offered in VSB180L, & ratings covered in SB200M to be offered in VSB200L)
Shaft extension Single cylindrical extension as per IS: 1231
Body material Cast iron.
T.box material Cast iron , mild steel for 250 & 355 Frames
Fan material Aluminium for all frames up to 225 frames, mild steel for ;250 & 355 frames
Accessories 
Nil
Paint & shade NC base RAL5012 shade up to 225, Epoxy base RAL5012 above 225
Bearing type 
Greasing facility
Open type ball/roller bearings for 180 to 355
Online greasing facility for 180 to 355
 
Download Brochure
Open Wound SPDP

 

PAGES LINKS :
Home | About Us | Products | Contact Us | Enquiry | Designed & Hosted by : MID | Promoted by : GID
 
PRODUCTS LINKS
 
AC Motors

High Voltage Motors : Megapack Closed Type Cage | Megapack Closed Type Wound | Spectrum Closed Type Cage | Spectrum Closed Type Wound

Low Voltage Motors : Primo Series| Spectrum Series | Open Type Series | Wound Open Type Series | Wound Close Type Series| Flame Proof Series | Non Sparking Series | Increased Safety Series | Crane Duty Slipring Motors| Crane Duty Cage Motors | Vertical Hollow Shaft Motors| Ring Frame Motors |
 
DC Motors :
Laminated Yoke DC Motors| Aise Series Mill Duty Motors| Solid Yoke DC Motors |
 
AC Generators :
AC Generator 5 to 90 KVA | AC Generator 100 to 650 KVA | Denki Series | Brushless E-series | Brushless Single & Double LV | Brushless Double Bearing HV |
 
DG Sets :
Freedom Series (12.5 to 34 KVA) | Republic Series (35 to 160 KVA) | Independence Series (180 - 500 KVA) |
 
Electronics :
AC Drives | DC Drives | Battery Charger | UPS |
 
Transformers :
Cast Resin Transformers | Distribution Transformers | Power Transformers | Special Transformers |