High Voltage Megapack Closed Type Wound Motors, Mumbai, India
  • slide1
  • slide2
  • slide3
  • slide4
  • slide5
  • slide6
  • slide7
  • slide8
  • slide9
  • slide10
  • slide11
  • slide12
  • slide13
  • slide14
  • slide15
  • slide16
  • slide17
 

Megapack Closed Type Wound (High Voltage Motors)

 

Megapack Closed Type Wound (High Voltage Motors)

 

Specifications
FEATURES VALUES/ STANDARDS
Ambient Temperature -10 to +50°C
Altitude Not exceeding 1000 m above mean sea level
Atmosphere Non corrosive & non hazardous
Relative Humidity Up to 100%
Voltage 415V, 690V, 6.6kV, 3.3kV, 11kV +/- 10%
Frequency 50Hz +/- 5%
Combined Variation +/-10%
Duty S1 (continuous)
Service factor 1.0
 
 
Construction Features
FEATURES VALUES/ STANDARDS
Protection IP 55
Type of cooling IC 611/ 81W
Class of Insulation F / H
Terminal Box position LHS from NDE
Bearing Roller Bearings at NDE, Ball bearings at DE
Lubrication Grease
Mounting IM 1001, IM 3011, IM 2001, IM 3001
Accessories ACH, 6*simplex RTD, 2* Duplex RTD type BTD
Frame sizes 355 frame to 710 frame
Shaft Extension Single cylindrical extension as per IS:1231
Connection Star
 

Performance Features

FEATURES VALUES/ STANDARDS
Method of starting LRS/ STATOR-ROTOR/GRR
Vibration As per IS: 12075
Noise As per IS: 12065
Fault withstand level of Terminal Box 43.7kA for 0.25sec, 39.4kA for 0.25 sec (in case of 11kV supply voltage)
Bearing Life 40,000 working hours in case of direct drive.
20,000 working hours in case of belt drive.
 
Download Brochure
World Class Series AC Motor
PAGES LINKS :
Home | About Us | Products | Contact Us | Enquiry | Designed & Hosted by : MID | Promoted by : GID
 
PRODUCTS LINKS
 
AC Motors

High Voltage Motors : Megapack Closed Type Cage | Megapack Closed Type Wound | Spectrum Closed Type Cage | Spectrum Closed Type Wound

Low Voltage Motors : Primo Series | Spectrum Series | Open Type Series | Wound Open Type Series | Wound Close Type Series| Flame Proof Series | Non Sparking Series | Increased Safety Series | Crane Duty Slipring Motors| Crane Duty Cage Motors | Vertical Hollow Shaft Motors| Ring Frame Motors |
 
DC Motors :
Laminated Yoke DC Motors| Aise Series Mill Duty Motors| Solid Yoke DC Motors |
 
AC Generators :
AC Generator 5 to 90 KVA | AC Generator 100 to 650 KVA | Denki Series | Brushless E-series | Brushless Single & Double LV | Brushless Double Bearing HV |
 
DG Sets :
Freedom Series (12.5 to 34 KVA) | Republic Series (35 to 160 KVA) | Independence Series (180 - 500 KVA) |
 
Electronics :
AC Drives | DC Drives | Battery Charger | UPS |
 
Transformers :
Cast Resin Transformers | Distribution Transformers | Power Transformers | Special Transformers |