Crane Duty Motor, Crane Duty Slipring Motor, Mumbai, India
  • slide1
  • slide2
  • slide3
  • slide4
  • slide5
  • slide6
  • slide7
  • slide8
  • slide9
  • slide10
  • slide11
  • slide12
  • slide13
  • slide14
  • slide15
  • slide16
  • slide17
 

Crane Duty Motor(Slipring) (Low Voltage Motors)

 

 

 

Specifications
FEATURES VALUES/ STANDARDS
Ambient Temperature -10 to +50°C
Altitude Not exceeding 1000mtrs above mean sea level.
Atmosphere Non Corrosive & non Hazardous
Relative Humidity Up to 100%
Voltage 415V ±10%, 3 Ph.
Frequency 50Hz ±5%
Combined Variation 10%
Duty S3,S4 & S5 (Refer KHD-50-33R2)
Service factor 1.0
 
 
FEATURES VALUES/ STANDARDS
Starting DOL up to 100 & Star Delta for 112 above frames
Permissible starts/hr Cold successive - 4 hot successive - 3 equally spread - 6
Loading at reduced volts 75% Rated volts for 5 minutes.
Insulation / temp.rise Class `F' / 70°C
Direction of rotation Bi-directional
No. Of leads 3 up to 100 & 6 for frame 112 & above
Connection Star Up to 90 frame, 6, & 8 pole ratings of 100 Frames
Delta 2 & 4 pole ratings of 100 frame & 112 and above all ratings
Degree of protection IP 55
Method of cooling IC 411
T.box position RHS looking from DE (towards DE up to 160).
Bearing life
(90% survival basis)
40,000 working hrs. For direct drive
20,000 working hrs. For belt drive
Vibration Normal class as per IS: 12075
Noise As per IS: 12065
Construction Foot / 'B' flange
Frame sizes 'ePM80 to 160', 'eSC180 to 355'.(For 'B' flange mounting ratings covered in 'eSC180M' to be offered in 'eVSC180L', & ratings covered in 'eSC225S' to be offered in 'eVSC225M')
Shaft extension Single cylindrical extension as per IS: 1231
Body material Cast iron
T.box material Cast iron
Fan material Aluminium up to 160, Cast iron for 180 – 225, mild steel for 250 to 355 Frames
Accessories
Nil
Paint & shade Epoxy base RAL5012
Bearing type 
Greasing facility
Prelubricated sealed bearing from 80-160. Open type Bearing
from 180. Online greasing facility is for 180 to 355 only
 
Download Brochure
Crane Duty Motors

 

PAGES LINKS :
Home | About Us | Products | Contact Us | Enquiry | Designed & Hosted by : MID | Promoted by : GID
 
PRODUCTS LINKS
 
AC Motors

High Voltage Motors : Megapack Closed Type Cage | Megapack Closed Type Wound | Spectrum Closed Type Cage | Spectrum Closed Type Wound

Low Voltage Motors : Primo Series | Spectrum Series | Open Type Series | Wound Open Type Series | Wound Close Type Series| Flame Proof Series | Non Sparking Series | Increased Safety Series | Crane Duty Slipring Motors| Crane Duty Cage Motors | Vertical Hollow Shaft Motors| Ring Frame Motors |
 
DC Motors :
Laminated Yoke DC Motors| Aise Series Mill Duty Motors| Solid Yoke DC Motors |
 
AC Generators :
AC Generator 5 to 90 KVA | AC Generator 100 to 650 KVA | Denki Series | Brushless E-series | Brushless Single & Double LV | Brushless Double Bearing HV |
 
DG Sets :
Freedom Series (12.5 to 34 KVA) | Republic Series (35 to 160 KVA) | Independence Series (180 - 500 KVA) |
 
Electronics :
AC Drives | DC Drives | Battery Charger | UPS |
 
Transformers :
Cast Resin Transformers | Distribution Transformers | Power Transformers | Special Transformers |